Measure Smart for the Perfect Fit: Replacement Windows in Henderson, KY
How To Measure For Replacement Windows In –
Henderson, KY: Measure In 3 Easy Steps
Replace Old Energy Draining Windows
With Brand New Windows!
Wind sneaking in through your windows – even when they’re closed? It’s time for replacement windows in Henderson, KY.
Old, drafty windows drain energy and make it impossible to keep the perfect temperature in your home. While new windows can help improve insulation, so when your windows are closed, they’re really closed.
At Window Shopping, we’ve partnered with top manufacturers to offer a wide selection of windows and doors, so you’re not limited to just one option. But before you can install the perfect windows, you need precise measurements to work with.
Measuring your windows the right way saves time and money – and it’s easy. So, where do you start? Here’s what you need to know.
Parts To Know About Your Window Frame
Before you get started, it helps to know the main parts of a window frame.
The head is the top horizontal section that supports the upper structure. The sill is the bottom horizontal part, providing a base and aiding with drainage.
The jambs are the vertical sides that support the sash and ensure a secure fit. Below the sill, the apron is a decorative trim piece that covers the gap between the wall and the frame for a polished look.
The sash holds the glass and can either be fixed or designed to slide or swing open. Lastly, weep holes are small drainage openings at the bottom of some frames, helping prevent moisture buildup by allowing water to escape.
Is Your Frame Ready For A Replacement?
Is your window frame ready for a replacement? Before measuring for the replacement windows, make sure your window frame is square, level, and plumb.
Here’s how to check:
- Square: Measure diagonally from one corner to the opposite corner on both sides. The frame’s square if both numbers are within 1/4 inch.
- Plumb: Hold a level against the side of the window. If the bubble is centered, the frame is straight up and down.
- Level: Place a level on the sill. A centered bubble means the sill is flat and even.
If you have a question about preparing for replacement windows, just reach out to us at Window Shopping. We’ve built strong relationships across the Tri-State area by treating every customer like family.
Step One: Measure Width
To measure your window width, start by measuring between the inside jambs at the bottom, middle, and top. Raise the sash to access the bottom jamb, and measure from the jamb surface, not the trim or parting beads.
Close the window and take another measurement in the middle, then one at the top. Record the smallest measurement. Now you have your window opening width.
Step Two: Measure The Height
To measure the height of your window, start from the high point of the sill, the surface closest to the inside of the window. Measure up to the top of the window opening.
After measuring from the sill to the top of the window opening in three places – left side, center, and right side – write down the smallest measurement. This is your window opening height.
Step Three: Measure The Depth
Depth usually isn’t an issue for replacement windows, but if your opening is too narrow, it could be. To check, measure from the back of the trim to the front.
Focus on the space between the inner and outer stops, and ignore pulleys or parting strips since they’ll be removed during installation. Window styles may vary, but the basic structure stays the same.
Expert Tips For Window Replacements
Now you know how to measure windows. It’s a simple process that brings you one step closer to your dream windows.
A few pro tips: Always be nice and measure twice. Measure two, three, or even four times to ensure accuracy – especially if the frame is uneven.
If measurements vary slightly, use the smallest one for the best fit. And always exclude trim from your measurements.
For extra ease, enlist a helper. While measuring for replacement windows can be a one-person job, having a second set of hands makes it much easier.
Get it right the first time. Window Shopping’s experts can confirm all measurements before you order. Explore the best replacement windows in Henderson, KY, today. Schedule your free consultation.